Loading ...
Loading ...
Loading ...
AXIS P3364–VE
Accessing the Product
Access from the Internet
Once connected, the Axis product is accessible o n your local network (LAN). To access the product from the Internet you must
configure your network router to allow incoming data traffic to the product. To do this, enable the NA T-trave rs al feature, which
will attempt to automatically co n fi gure the router to allow access to the prod uct. This is e n able d from Setup > System O ptions >
Network > TCP/IP A d va n ced.
For mo re information, please s ee
NAT traversal (port mapping) for IPv4, on page 44
. See also AXIS Internet Dynamic DNS Service at
www.axiscam.net For T echnical notes on this and other t opics, visit the Axis Support web at www.axis.com/techsup
Set the Root Password
To gain access to the Axis product, you must set the password for the d efault administrator user root. This is done in the Configure
Root Password dialog, which appears w hen the product is accessed for the first time.
To prevent network eavesdropping, the root password can be set via an encrypted H TTPS connection, which requires an HTTPS
certificate. HTTPS (Hypertext Transfer Protocol over SSL ) is a protocol used to encrypt traffic between web browsers and servers. The
HTTPS certificate ensures encrypted exchange of information.
To set the password via a standard HTTP connection, enter it directly in the first dialog.
To set the password via an encrypted HTTPS connection, follow these steps:
1. Click Create self-signed certificate.
2. Provide the requ ested information and click OK .Thecertifi ca te is created and the passwo rd can now be set securely. A ll
traffic to and from the product is encrypted from this point on.
3. Enter a password and then re-enter to confirm the spelling. Click OK. The password has now been configured.
Note
• The default administrator user name root is permanent and cannot be deleted.
• If the password for root is lost, the product must be reset to the factory default settings. See
Reset to Factory Default
Settings, on page 49
.
Set Power Line Frequency
Power line frequency is set the first time the Axis product is a cces sed and can only be changed from Plain Config(see
page 49
)
or by resetting the product to factory default.
8
Loading ...
Loading ...
Loading ...