Loading ...
Loading ...
Loading ...
AXIS P3364–VE
System Options
This function can be disable d under System Options > Network > TCP/IP > Advanced.
HTTP
The HTTP port used by the Axis product can be changed under System Options > Network > TCP/IP > Advanced. In add ition to the
default setting, w hich is 80, any port in the range 1024–65535 can be used.
HTTPS
The H TTPS p ort u sed by the Axis product can be changed under System Options > Network > TCP/IP > A dvanced. In addition to
the default setting, which is 443, any po rt in the range 1024–65535 can be used.
To enable HTTPS, g o to System Options > Security > HTTPS. For m ore information, see
page 38
.
NAT traversal (port mapping) for IPv4
A ne tw ork router allows de vices on a private network (LA N) to share a single connection to the Internet. This is do ne by forwarding
network traffic from the private network to the “outside”, that is, the Internet. Security on the private network (LAN) is increased
since most routers are pre-configured to stop attempts to access the private network (LAN) from the public network (Internet).
Use NAT traversal w he n the Axis product is located on an intranet (LAN) and you wish to make it a vaila ble from the other
(WAN) side of a NAT ro u te r. With NA T traversal properly c on figured, all HTTP traffi c to an external HTTP port in the NAT router
isforwardedtotheproduct.
NAT tra ve rs al is configured under System Options > Network > TCP/IP > A dvanced .
Note
• F or NA T tra vers al to w ork, this mus t be supporte d by the ro uter. The router must also support UPnP
TM
.
• The router has ma ny different names: “NAT router”, “Network router”, “Internet Gateway”, ”Broadband router ”, “Broa dband
sharing device” or “Home firewall” but the essential purpose of the device is the same.
Enable/Disable - When enabled, the Axis product attempts to configure port mapping in a NAT router on your network, using UPnP
TM
.
Note that UPnP
TM
must be enabled in the product (see System O ptions > Network > UPnP).
Use manually selected NAT router - Select this option to manually select a N AT router and enter the IP ad dress for the ro uter in
the field. If no router is specified, the product a utomatically searches for NAT routers on your network. If more than one router is
found, the default router is selected.
Alternative HTTP port - Select this option to manually define an external HTTP port. Enter the port number in the field. If no port is
entered he re , a port number is autom a tically selected when NAT traversal is enabled.
Note
• An alternative HTTP port can be used or be active even if NAT traversal is disabled. This is useful if your NAT router does
not support UPnP and you need to manually configure p ort for wa rding in the NAT router.
• If you attempt to manually ent
er a port that is already in use, another available port is automatically se le cte d.
• When the port is selecte d a utom atically it is displayed in this field. To change this, enter a new port number and click Save.
FTP
The FTP server running in the Axis product enables upload o f new firmware, user applications, etc. The FTP s erver can be disabled
under System Op tions > Network > TCP/IP > Advanced.
Note
This FTP serv
er has nothing to do with the product’s ability to transfer images via FTP to other locations and servers.
44
Loading ...
Loading ...
Loading ...