Loading ...
Loading ...
Loading ...
AXIS P3364–VE
System Options
Mounting is d one automatically when the card is inserted or when the product is started. A manual mount is only required if the
card has been unmounted and not ejected and re-inserted.
To unmount the SD card:
1. Go to System Options > Storage and click SD Card.
2. Click Unmount.
3. The card can now be removed.
The S D card is m anag ed on the System Options > Storage page. Click SD Card to o pen Storage M anagement.
If the card’s status shows as fa ile d, click Check disk to see if the problem can be found and then try Repair. This option is only
available for SD card s with ext4. For SD cards with vFAT, use a card reader or computer to troubleshoot the card.
To avoid filli ng the card, it is recomme nde d to remove recordings continuously. Under Recording Settings, select Remove recordings
older than and select the number of days or weeks.
To stop writing to the card and protect recording s from being removed, select Lock under Recording S ettings.
Network Share
Network share allows you to add netw ork storage such as a NAS (Network Attached Storage) or any server that u ses CIFS (Common
Internet File System) a nd use them f or storage of recording s.
To add a network share:
1. Go to System Options > Storage.
2. Click Network Share.
3. Enter the IP address, DNS or Bonjour name to the host server in the Host field.
4. Enter the name of the share in the Share fiel d.
5. If required, select The share requires login and enter the user name and password.
6. Click Connect.
To cle ar all recordings and data from the Axis product’s folder on the d esignate d share , click Clear under Storage T ools.
To avoid filling the share, it is recommended to remove recordings continuously. Under Recording Se ttings,selectR emove recordings
older than and select the number of days or weeks.
To stop writing to the share a nd protect recordings from being removed, select Lock und er Recording Settings.
Ports & Devices
I/O Ports
The Axis product provides one input port and one outp u t port for connection of external devices. For information on how to connect
external devices, see
Connectors, on page 4
.
The I/O ports are configured under System Op tions > Ports & Devices > I/O Ports. The ports can be given descriptive names and their
Normal states can be c onfigured as Open circuit or Grounded circuit.
Port Status
The list on the System Options > Ports & Devices > Port Status page shows the status of the product’s input and output ports.
47
Loading ...
Loading ...
Loading ...