Loading ...
Loading ...
Loading ...
AXIS P3364–VE
Detectors
Detectors
Camera Tampering
Camera Ta m per ing can genera te an alarm whenever the camera is repositioned, or when the lens is covered, sprayed or severely
defocused. To send an alarm, for example an email, an action rule must be set up.
To configure tampering:
1. Go to Detectors > Camera Tampering.
2. Set the Minimum duration, that is, the time that must elapse b efore an alarm is generated. This can h el p p re vent f als e
alarms for known conditions that affect the image.
3. Select Alarm for dark images if an alarm should be generate d if lights are dimmed or turned off, or if the lens is sprayed,
covered, or rendered severely out of focus.
4. Click Save.
To configure the pro duct to send an alarm when tampering occurs:
1. Go to Events > Action Rules.
2. Click Add to set up a new actio n rule.
3. Enter a Name for the action rule.
4. Under Condition,selectDetectors from the Trigger list.
5. Select Tamp erin g from the list of detectors.
6. Optionally, sele ct a schedule and set additional conditions.
7. Select the action. To send an email, select Send Notification a
nd select a Recipient from the list of defined recipients.
Note
The While the rule is active op tion under Duration cannot be used with camera tampering, since camera tampering does not
have a duration and once it has been triggered it will not automatically return to its untriggered state .
For more information on actions rules, see
Events, on page 32
.
Motion Detection
Motion detection is used to generate an alarm w h enever movement starts or stops in the camera view.
Motion detection is configured by d efining up to 10 Include and Exclude windows:
• Include windows —define areas w here motion should be detected
• Exclude windows —define areas within an Include window that should be ignored (areas outside Include w indows
are automatically ignored).
For instructions, see
Set Up Motion Detection Windows, on page 29
.
To control the number of motion detection alarms, the parameters Object Size, History and Sensitivity can be adjusted. See
Motion
Detection Parameters, on page 29
.
Once motion detection windows are configured, the Axis product can be configured to perform actions w hen m o tion is detected.
Possible actions include uploading images and start recording. For more information, see
Setting Up a n Action Rule, on page 33
.
28
Loading ...
Loading ...
Loading ...