Loading ...
Loading ...
Loading ...
AXIS P3364–VE
Events
Events
The A xis p roduct can be configured to perform actions when diffe rent events occur, for exam ple , star t a recording when motion i s
detected. The set of conditions that defines how and w hen the action is triggered is called an Action Rule.
Available Action Rule triggers and conditions include:
• Applications — use installed a pplica t ions to trigger the rule, see
Applications, on page 31
.
• Detectors
- Audio Detection — trigger the rule when audio is detected, see
Audio Detection, on page 30
.
- Day/Night Mode — trigger the r ule w hen the product switches b etween day mode (IR cut filter on) and night
mode (IR cut filter off). This can for example be used to control an external infrared (IR) light connected
to an output port.
- Motion Detection — trigger the rule when motion is detected, see
Motion Detection, on page 28
.
- Tampering — trigger the rule wh en tampering is detected , se e
Camera Tampering, on page 28
.
• Hardware
- Fan — trigger the rule if the fan is malfunctioning. Thiscanforexamplebeusedtosendmaintenance
notifications.
- Heater — trigger the rule if the heater is malfunctioning. This can for example be used to send maintenance
notifications.
- Network — trigger the rule if network connection is lost or restored. This can for example be used to start
recording to the SD card.
- Temperature — trigger the rule if the tem pe ra ture falls outsid e or inside the operating range of the product. This
canforexamplebeusedtosendmaintenancenotifications.
• Input Signal
- Digital Input Port — trig ger the rule when an I/O p
ort receives a signal from a connected device, see
I/O
Ports, o n page 47
.
- Manual Trigger — trigger the rule using the Manual Trigger button in the Live View page, see
Controls on the
Live View Page, on page 9
. This can for example be used to validate a ctions during pro duct installation
and configuration.
• PTZ
- Moving —tr
igger the rule when the camera view moves due to a PTZ operation. This can for example be used
as an additi onal condition to prevent an action rule triggered by motion detection to record video while the
camera view m oves due to a P TZ operation.
- Preset Reached —triggertherulewhenthecamerastopsatapresetposition.Thiscanbeforexamplebeused
w
ith the Send Images action to upload images from the preset p ositio n.
• Storage
- Available — trigger the rule when the storage device is unmounted or removed. This can for example be
used to send maintenance notifications.
- Full — trigger the rule when the s torag e device is full. Under norma l operation, the oldest recordings will be
overwritten to prevent the storage device from becoming full.
- Locked — trigger the rule if the storage device is locked (write protected).
32
Loading ...
Loading ...
Loading ...