Loading ...
Loading ...
Loading ...
AXIS P3364–VE
System Options
• Set m anually a llow s you to manually set date an d time.
If using an NTP server, select your Time zone from the drop-down list. If required, check Automatically adjust for daylight saving
time changes.
The Date & Time Format Used in Images is the date and time format displayed as a text overlay in the video stream. Use the
predefined formats or see
File Naming & Date/Time Formats
in the online h elp for information on how to create custom date and
time formats. To includ e date and time in the overlay text, go to Video & Audio and select Include date and Include time.
Network
Basic T CP/IP Settings
The Axis product supports IP version 4 and IP version 6. Both versions can be enabled simultaneously, and at least one version
must always be enabled.
Network Interface Mode
The n etwo rk interface to the AXIS product can be wired or wireless. Different settings can be us ed for each network in te rf ace , but
only one can be used at a time. In Auto mode the product will use a wireless network unless a network cable is connected, in which
case it w ill use the wired network. In Wired mode the product w ill require a network cable to connect to the network.
IPv4 Address Configuration
By default, the Axis p roduct is set to use IPv4 (IP version 4) and to obtain the IP address a utomatically via DHCP. The IPv4 settings are
configured under System Options > Network > TCP/IP > Basic.
DHCP (Dynamic Host Configuration Protocol) allows netw ork administrators to centrally manage and automate the assignment of
IP addresses. DHCP should only be enabled if using dynamic IP address notification, or if the DH C P can update a DNS server. It is
then possible to access the Axis product by name (host name).
If DHCP is enabled and the product cannot be accesse d, ru n AX IS IP U tility to search the network for connecte d Axis products, or reset
the product to the factory default settings (see
page 49
) and then perform the installation again.
To u se a static IP address, chec k Use the following IP address and specify the IP address, subnet mask and d efault router.
IPv6 Address Configuration
If IPv6 (IP version 6) is enabled, the Axis product will receive an IP address according to the configuration in the network router.
To enable IPv6, go to System O ptions > Network > TCP/IP > B asic. Other settings for IPv6 should be configured in the network router.
ARP/Ping
The IP address can be set using ARP and Ping . For instructions, see the product’s Installation Guide.
ARP/Ping is enabled by defau lt. To disa ble , uncheck the box under System Options > Network > TCP/IP > B asic.
The ARP/Ping service is autom atica lly disabled two minute s after the product is started, or as soon as an IP address is s et. To reset the
IP address, the product must be restarted to activate ARP/Ping f or an additional tw o minutes.
Pinging the product is still possible when this service is disabled.
AXIS Video Hosting System (AVHS)
AVHS used in conjunction with an AVHS service, provides easy and secure Internet access to live and recorded video accessible from
any location. For m ore information and help to find a local AVHS Service Provider go to www .axis.com/hosting
AVHS is enabled by d efa u lt. The s ettings are con figured under System Options > Network > TCP IP > Basic.
42
Loading ...
Loading ...
Loading ...