Rigol DS2102A DS2000 serie User guide

Loading ...

RIGOL Chapter 13 Signal Source

13-16 MSO2000A/ DS2000A User’s Guide

6. Time

Press Time to set the duration of the current point. This setting is limited by the

times of the previous point and following point. The time of point 1 is fixed at 0 s.

For the setting method, please refer to the introduction in “

Parameter Setting

Method”.

7. I nsert

Press I nsert to insert a new waveform point between the current point and the

next point.

8. Delete

Press Delete to delete the current point from the waveform and connect the

remaining points.

Note: Point 1 cannot be deleted.

9. Done

Press Done to f inish editing the current waveform.

10. Save

Press Save to enter the file store interface. Please refer to the introduction in

“

Store and Recall” to save the current waveform file in “.arb” format in the

internal memory (you can overwrite the original file or save the current

waveform again).

You can select the arbitrary waveforms in the internal or external memory for

output. For the details, refer to the introduction in “To Select Waveform”.

To Edit Waveform

You can edit the waveform currently stored in the volatile memory of the instrument.

Press Edit to enter the waveform editing menu.

1. I nterp

Press I nterp to turn on or off the interpolation mode between the points of the

waveform.

Loading ...

Rigol DS2102A oscilloscope