Rigol DS2102A DS2000 serie User guide

Loading ...

RIGOL Chapter 6 MATH and Measurements

6-24 MSO2000A/DS2000A User’s Guide

Measurement Setting

1. Source Selection

Press Measure  Source to select the source channel (CH1, CH2, MATH or

any channel of D0-D15) of the time, voltage or area parameter. The color of the

parameter icons under MENU at the left of the screen will change with the

source selected.

2. Measurement Range

Press Measure  Range  Range to select “Screen” or “Cursor” for

measurement.

When “Cursor” is selected, two cursor lines appear on the screen. At this point,

press CursorA and CursorB and use to adjust the position of the two

cursor lines respectively so as to determine the measurement range. Or, press

CursorAB and use to adjust the positions of cursor A and cursor B at the

same time.

Note: You can press continuously to switch among CursorA, CursorB and

CursorAB.

Figure 6-6 Cursor Region

3. Delayed Measurement Setting

Specify source A and source B in the measurement items “Dly A

→B ”, “Dly

→B ”, “Dly A →B ” and “Dly A →B ”.

Press Measure  Setting  Type  “Delay” and then press SourceA and

SourceB to set the two channel sources (CH1, CH2 or any channel of D0-D15)

of delayed measurement respectively.

Note: When SourceA is set to any analog channel (or digital channel),

Loading ...

Rigol DS2102A oscilloscope