Rigol DS2102A DS2000 serie User guide

Loading ...

RIGOL Chapter 13 Signal Source

13-14 MSO2000A/ DS2000A User’s Guide

To Select Waveform

Press Select to open the waveform selection menu.

1. To Select Stored Waveform

Press Stored to enter the file recall interface. Users can select the arbitrary

waveform stored in the internal or external memory to recall. Use

to select

the desired waveform and press Load.

2. To Select Channel Waveform

 Press Channel  Source to select the desired source (CH1, CH2 or

MATH).

 Press Channel  Range to select “Screen” or “Cursor”. When “Cursor” is

selected, two orange cursor lines occur on the screen; at this point, you can

adjust the positions of the corresponding cursor line by pressing CursorA

or CursorB respectively and then rotating ; you can also adjust the

positions of cursors A and B at the same time by pressing CursorAB and

rotating

 Pressing Load can output the waveform in the region currently selected.

You can also edit the waveform currently selected; for the details, refer to the

introduction in “To Edit Waveform”.

To Create Waveform

Users can create arbitrary waveforms according to their needs. Press Create to

enter the waveform creation menu.

1. Set the I nitial Points

When creating a new waveform, the waveform editor will create a waveform

formed by two points automatically. By default, point 1 is f ixed at 0 s and point 2

is fixed at the middle of the period.

Press I nitial to set the initial points of the new waveform. The available range is

from 1 to 16384 (16 kpts). For the setting method, please refer to the

Loading ...

Rigol DS2102A oscilloscope