FLUKE PRESSCAL Pressure Calculation/Calibration Software

User Manual for the Fluke PressCal Pressure Calculation/Calibration Software - Page 17

For PRESSCAL.

PDF File Manual, 40 pages, Read Online | Download pdf file

PRESSCAL photo
Loading ...
Loading ...
Loading ...
Setting Up PressCal
Managing Weight Set Details 2
2-5
gmp04.bmp
Figure 2-3. Weight Set Details Window
Viewing Weight Set Details (and Modifying the Recalibration Data)
Double-click on the chosen Weight Set from the options shown in the list. The main table
updates showing the following:
Type (C/M/I)
The type of weight shown is either C (Carrier), M (Major
Mass), or I (Incremental).
Identity
The identity of the weight, as labeled on the weight itself
Density (kg/m
3
)
Shows the physical density of the weight. This is dependent
upon the weight’s material type.
Corrected Mass (g)
The corrective mass as specified by SI Pressure Instruments.
The window also shows general information on the Weight Set, as well as the previous
calibration date.
The details shown within the window are read-only and can only be modified by
SI Pressure Instruments. However, it is possible to set a new calibration date by using the
“Recalibration Date” scroll bars (
v
). The new date is then shown on any printouts of the
“Weight Set Details”, and if expired is also shown in a pop-up window whenever the
details are accessed.
Printing Weight Set Details
To print out the details of a weight set, double-click on the chosen “Weight Set” from the
options shown in the list, click on Print, then follow the online instructions.
Click on Exit to close the “Weight Set Details” window.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...