Loading ...
Loading ...
Loading ...
En
29
Advanced Operation
Button or control
that is operated
Function
MASTER button Set target deck to beat sync master
CAPTURE button
+ pad
Load loop of target deck in sampler slot
SHIFT + CAPTURE
buttons
Load slicer target area of target deck in sampler slots
PARAMETER button
(in the hot cue mode)
Call out cue point or loop of loaded track
Deck status mirroring function
When the statuses below differ on the respective decks, they are auto-
matically set to the same statuses as on the deck whose [DECK] button
is lit.
! Vinyl mode status, pad mode status, slip mode status
Using the fader start function
Using the channel fader start function
1 Set the cue.
Pause at the position from which you want to start playback, then press
the [CUE] button for the corresponding deck.
! Cues can also be set by moving the channel fader from the back to
the position nearest you while pressing the [SHIFT] button in the
pause mode.
2 While pressing the [SHIFT] button, move the channel
fader from the position nearest you towards the back.
Playback of the track starts from the set cue point.
!
When the channel fader is moved back to the position nearest you
while pressing the [SHIFT] button during playback, the track moves
instantaneously back to the set cue point and the pause mode is set.
(Back Cue)
If no cue is set, playback starts from the beginning of the track.
When the channel fader is moved from the back to the position near-
est you while pressing the [SHIFT] button when standing by at a cue,
track playback starts from the set cue.
Using the crossfader start function
To use the crossfader start function, set the crossfader assign selector
switch of the channel you want to move to [A] or [B].
1 Set the cue.
Pause at the position from which you want to start playback, then press
the [CUE] button for the corresponding deck.
! Cues can also be set by moving the crossfader to the left edge or the
right edge while pressing the [SHIFT] button in the pause mode.
2 Move the crossfader to the left edge or right edge
position.
Set to the edge opposite the side on which the channel you want to use
with the fader start function is set.
3 While pressing the [SHIFT] button, move the
crossfader in the opposite direction from the left edge or
right edge.
Playback of the track starts from the set cue point.
! When the crossfader is returned to the original position while press-
ing the [SHIFT] button during playback, the track moves instanta-
neously back to the set cue point and the pause mode is set (Back
Cue).
If no cue is set, playback starts from the beginning of the track.
When the crossfader is moved from the left edge to the right edge (or
from the right edge to the left edge) while pressing the [SHIFT] but-
ton when standing by at a cue, track playback starts from the set cue
point.
Using effects
The effect functions of rekordbox dj can be roughly divided into three
types: BEAT FX, SOUND COLOR FX, and RELEASE FX.
The following explains how to operate the three effect function types,
BEAT FX, SOUND COLOR FX, and RELEASE FX.
For details on pad FX for operating these effects using the performance
pads, see Using the pad FX on page 24 .
Using the beat FX function
Beat FX can apply an effect matched to the tempo (BPM) of the track
loaded in the deck.
Beat FX has the two effect units FX1 and FX2, and the deck assigned on
each of these units can be freely set.
Also, beat FX has two FX modes: beat FX single mode and beat FX multi
mode.
The beat FX single mode allows you to select one effect and use up to
three parameters for one effect unit.
The beat FX multi mode allows you to use up to three effects for one
effect unit simultaneously.
Using effects in the beat FX multi mode
The following describes how to assign an effect unit to channel 1.
1 Press the [FX MODE] button to switch the FX mode of
rekordbox dj to the beat FX multi mode.
The mode switches between the beat FX multi mode and beat FX single
mode each time the buttons are operated.
2 Press the [FX1] button or [FX2] button of channel 1 to
select the effect unit to assign.
3 Press the effect parameter 1 button while pressing
the [SHIFT] button to select the first effect type.
To select the second effect type, press the effect parameter 2 button
while pressing the [SHIFT] button.
To select the third effect type, press the effect parameter 3 button while
pressing the [SHIFT] button.
The currently selected effect type is displayed on the rekordbox dj
screen.
Loading ...
Loading ...
Loading ...