Loading ...
Loading ...
Loading ...
En
27
Advanced Operation
1 Call out and play a sequence.
Calling out and playing a saved sequence (p. 26 )
2 Press and hold the [PARAMETERc] button.
rekordbox dj remains in the sequence mute mode while the
[PARAMETERc] button is pressed.
!
If the [PARAMETERc] button is released, the sequence mute mode
is canceled.
3 Press a performance pad.
The sound of the slot assigned to the pad that was pressed is muted.
! If the same pad is pressed again, mute is canceled.
Using the sequence erase mode
In the sequence erase mode, you can erase sequences on a sampler slot
basis.
1 Call out and play a sequence.
Calling out and playing a saved sequence (p. 26 )
2 Press and hold the [PARAMETERd] button.
rekordbox dj remains in the sequence erase mode while the
[PARAMETERd] button is pressed.
! If the [PARAMETERd] button is released, the sequence erase mode
is canceled.
3 Press a performance pad.
The sequence of only the slot assigned to the pad that was pressed is
erased.
Using sequence calling
Up to eight saved sequences can be called and played directly from a
pad.
1 Press the [SAMPLER] button twice in a row.
The mode switches to the sequence call mode.
2 Press a performance pad.
The sequence saved to the pressed pad plays.
The eight sequences are the same for the left and right pads.
For details on saving sequences, see Recording a sequence on
page 26 .
3 During playback, press a performance pad.
Playback continues by returning to the beginning of the sequence.
4 Press a performance pad while pressing the [SHIFT]
button during playback.
The playing sequence stops.
Using the active sensor
An effect can be added to a range specified in a track. When the play-
back position comes into that specified range, the effect is applied
automatically.
1 Press the [HOT CUE] button twice in a row.
The mode switches to the active sensor mode.
Four types of effects and operation functions are assigned to each per-
formance pad as shown below.
①
Reverse roll
②
Trance
③
Echo
④
Vinyl brake
⑤
Start position
specification
button
⑥
End position
specification
button
⑦
Specification
range clear
button
⑧
Active sensor
ON/OFF
button
2 Press performance pad 5.
The start position is specified from the playback position.
3 Press performance pad 6.
The end position is specified at the playback position, and the specifica-
tion range is confirmed.
4 Press performance pad 1 to pad 4.
The effect to apply during playback in the specified range is selected. If
there are multiple specified ranges, the same effect is applied to all of
the ranges.
5 Press performance pad 8.
The active sensor effect turns on or off.
6 Press performance pad 7.
The specified range at the playback position is cleared.
Calling out cue points
A cue point or loop point that was saved in rekordbox dj can be called
out.
1 Press the [HOT CUE] mode button.
2 Press the [PARAMETERc] or [PARAMETERd] button.
If you wish to call out a cue point that is before the current playback posi-
tion, press the [PARAMETER c] button.
If you wish to call out a cue point that is after the current playback posi-
tion, press the [PARAMETER c] button.
The track cues to the called out point and pauses.
Using the slip mode
When the slip mode is turned on, normal playback with the original
rhythm continues in the background during scratching, looping and hot
cue playback. When scratching, looping or hot cue playback is canceled,
normal playback resumes from the position reached up to the point at
which the operation was canceled.
Various performances can be achieved without breaking the rhythm.
! The [SLIP] button lights when the slip mode is set and flashes while
the sound is being played in the background.
Slip scratching
1 Press the [JOG MODE] button.
The unit switches to VINYL mode.
2 During playback, operate the top of the jog dial to
scratch.
Normal playback continues in the background even while scratching.
3 Release your hand from the top of the jog dial.
Playback starts from the position reached in the background.
! To cancel the slip mode, press the [SLIP] button again.
Slip hot cue
1 Press the [HOT CUE] mode button.
Set the hot cue mode.
2 Set the hot cue.
Press a performance pad to set the hot cue.
3 Press the [SLIP] button.
The mode switches to the slip mode.
4 During playback, press and hold a performance pad.
Playback starts from the position at which the hot cue was set. Playback
continues as long as the performance pad is pressed.
Normal playback continues in the background even while the hot cue is
playing.
5 Release your finger from the performance pad.
Playback starts from the position reached in the background.
! To cancel the slip mode, press the [SLIP] button again.
Loading ...
Loading ...
Loading ...