Loading ...
Loading ...
Loading ...
5
EN
• Press down on the central section and turn the valve to line
up the position with the marker (L) - Fig 5
• Remove the valve.
To replace the operating valve
• Fit the operating valve, lining up the with the marker
(L).
• Press down on the central section and then turn to the
required position
- Fig 7.
Using for the first time
• Fill the pot with 1/2 water. Add 4 tablespoons of
baking soda.
• Put the operating valve (A) in place on the steam
release outlet (B) - Fig. 5.
• Position the symbol 1 on the valve (A) opposite the
marker (L) - Fig 7.
• Close the pressure cooker.
• Place the pressure cooker on a heat source set to
maximum power.
• When steam begins to exit the valve Fig 12, turn
down the heat source and set a timer to 20 min.
• After 20 min., turn off your heat source.
To release the steam
• Position the symbol on the valve (A) opposite the
marker (L).
• Rinse your pressure cooker.
To replace the operating valve
• Fit the operating valve, lining up the with the
marker (L).
• Press down on the central section and then turn to
the required position.
Cooking
Before cooking
• Before each use, remove the operating valve (A) (see
section "Using the operating valve") - Fig. 5. Check
these by holding them up to the light, making sure
the steam release outlet is not clogged - Fig. 11.
If necessary, clean with a tooth pick - Fig. 11bis.
..
..
..
To make blackening
of aluminium
disappear from
already used
products : repeat
"first use"
instructions with
baking soda.
Loading ...
Loading ...
Loading ...