Loading ...
Loading ...
Loading ...
2
_To install bagger components to tractor
1.
Discharge Chute
2. 3/8 Nut
3. Flat Washer
3
1. SupportBracket
2. 3/8 CarriageBolt
1
3. 3/8 LockNut 5
4. 3/8 x 63,5mmHe0(Bolt
5. lO,3mm (13/32") flat
washer
2
1,
2.
3.
Removedischargechutefromrearoftractor.Unhookthe
two(2) strapsand pullchuteoutand away fromtractor.
Removethe two (2) 3/8 nutsand flatwashers from the
boltsat thetractorbackplate.
3/8 Lock nut
Flat Washer
Support Tube
Using the nuts and flat washers removed from tractor
back plate, install the bagger support tuba to the back
plate as shown. Tighten securely.
• Install the two upper support brackets through the back
plateand tothe chassis, usingthe 10 x19 mm (3/8"x3/4")
cardage bolts and Iocknutssupplied.Tighten securely.
• Assemble both support brackets to the outside of the
baggger support tube using two each 3/8 x 63,5mm hex
bolts13/32" I.D.fiat washers and 3/8 Iocknuts from parts
bag.Tighten securely.
1. Hook
2. Discharge Chute
3. Back plate slot
3
Replace discharge chute into roar opening of tractor.
Secure the chute with the two hook straps.
NOTE: The strap hook mustgo through the discharge chute
only. Do not allow the hook to enter the slot in the tractor
back plate.This will allowthe discharge chute tofloat withthe
mower deck when moving on uneven terrain.
24
Loading ...
Loading ...
Loading ...