Loading ...
Loading ...
Loading ...
SyncMaster 400PX/460PX
._SelectLang _age IVlan Page
Safety _ngtruct on5
ntroduct on
Cormect ons
Ugn9 the Softwa_'e
Ad_usti_g the LCD Digplay
TFoub_eshooting
Self-Test Feature Check
Check List
Q&A
Spec ficat o_s
Informat on
SyncMaster
t_'_odeB
;_ V _y,,W_ ,i OFII
The co,or and appearance of the product may vary depending on the model and the product specifications are
subject to change without prior notice for reasons of performance enhancement.
Troubleshooting
Self-Test Feature Check
[] Note
Check the following items yourself before calling for assistance Contact a Service Center for problems that
you cannot solve by yourself.
Self._Tef-,t Feature Check
Your LCD Display provides a self test feature that allows you to check whether your LCD Display is functioning
properly
1) Turn off both your computer and the LCD Display.
2) Unplug the video cable from the back of the computer.
3) Turn on the LCD Display.
The figure shown below ("Check Signal Cable") appears on a black background when the LCD Display is
working normally even though no video signal is detected: While in the Self-Test mode. the LED power
indicator remains green and the figure moves around on the screen
Check Signal Cable
PC
4) Turn off your LCD Display and reconnect the video cable: then turn on both your computer and the LCD
Display
If your LCD Display screen remains blank after using the previous procedure, check your video controller and
computer system; your LCD Display is functioning property.
Not Opt mum _ode
You can even view the screen at a resolution of 1360X768. However. you will receive the following message for
a minute; You can choose to change the screen resolution or stay in the current mode during that time. And if the
resolution is more than 85Hz. you will see the black screen because the LCD Display does not support over
85Hz.
Not Optimum Mode
Recommended Mode
1360x 768 60Hz
[] Note
Refer to Specifications > Preset Timing Modes for the resolutions or frequencies supported by the LCD
Display
Loading ...
Loading ...
Loading ...