Loading ...
Loading ...
Loading ...
Setting the On/Off Timer
1=
Press the MENU button to display the menu.
Press the A or T button to select "Setup", then press the ENTER
button.
Press the A or T button to select "Time", then press the ENTER _ button.
2, Three different On/Off Timer Settings can be made.
Press the A or T button to select "Timer 1", "Timer 2" or "Timer 3", then
press the ENTER C;_ button.
3= Press the _ or _- button to select the desired item below.
Press the A or T button to adjust the setting.
- On Time: Set the Hour. Minute. am!pro, and Activation!Inactivation.
(To activate timer with the setting you've chosen, set to "Activate".)
, Off Time: Set the Hour. Minute. am/pro, and Activation/inactivation.
(To activate timer with the setting you've chosen, set to "Activate%
- Volume: Set the desired volume level
, Contents: When the "On Time" is active, you can turn on a specific
channel or play back contents such as photo or audio files.
- TViUSB: Select TV or USB (Make sure that an USB device is
connected to your TV.)
- Antenna: Select "Air" or "Cable".
- Channel: Select the desired channel.
- Music: Select the folder containing MP3 files on the USB device.
- Photo: Select the folder containing JPEG files on the USB device.
- Repeat: Select "Once". "Everyday", "Mon~Fri". "Mon~Sat", "Sat~Sun".
or 'Manual".
> When "Manual" is selected, press the _ button to select the
desired day of the week. Press the ENTER _ button over the
desired day and the _ mark will appear.
Press the EXiT button to exit.
>- You can set the hour, minute and channel by pressing the number
buttons on the remote control.
>- Auto Power Off
When you set the timer On, the television will eventually turn off, if no
controls are operated for 3 hours after the TV was turned on by the
timer. This function is only available in timer On mode and prevents
overheating, which may occur if a TV is on for too long time.
Loading ...
Loading ...
Loading ...