Loading ...
Loading ...
Loading ...
Problem
Screen is black and power indicator
light blinks steadily.
Image is not stable and may appear
to vibrate when you have a computer
connected to the PC input.
Possible Solution
On your computer check: Power, Signal Cable.
The TV is using its power management system.
Move the computer's mouse or press any key on the keyboard.
If the setting is not correct, use your computer utility program to change the
display settings.
_-- Your TV supports multiscan display functions within the following
frequency domain:
Horizontal frequency (kHz) 30~60
Vertical frequency (Hz) 60~75
PC Maximum refresh rate (at 60 Hz) 1920 x 1080
Image is not centered on the screen. Adjust the horizontal and vertical position.
The screen position must be adjusted on the output source (i.e. STB) with a
digital signal.
The picture appears distorted in the If "Just Scan" is selected with some external devices, the picture may appear
corner of the screen, distorted in the corner of the screen. This symptom is caused by the external
devices, not TV.
The 'Resets all settings to the default This appears when you press and hold the EXIT button for a while. The product
values' message appears, se!!!ngs are rese! !o the !act0ry detau!!s: .....................................................................................................................................................................................
You may see small particles if you This is part of the product's design and is not a defect.
look closely at the edge of the bezel
This TFT LCD panel uses a panel consisting of sub pixels (6 220 800) which require sophisticated technology to produce.
However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of
the product.
Loading ...
Loading ...
Loading ...