Loading ...
Loading ...
Loading ...
Inserting and Removing Disc
Inserting Disc
1 Press the DISC EJECT lever down once and
release it.
A few moments after the ACCESS/PC indicator
blinks, the cover of disc insertion compartment
will open slightly.
2 Open the cover by hand and fit the disc onto the
spindle in the center.
g/
Pickup lens playback side
lever
Push the
shaded portion.
Note:
• The exposed disc portion must face in the same
direction as the lens, as shown in figure.
• The recording/playback side must face the inside of
DVD Video Camera.
• De net use excessive force when opening the
Cover.
• Do not touch the pickup lens or the recording/
playback side of the disc,
This may impair recording and playback.
• Insert the disc securely to prevent damage.
• When you open the lid, the ACCESS/PC indicator
flashes red. Do not leave the lid open.
Oldentifying recording/playback
sides of disc:
This section describes double- "SIDE A" mark
sided discs. Note that the
included DVD-RAM disc is a
single-sided disc. i, :,_O_)
The opposite
Single sided disc:
The recording/playback side is
opposite to the labelled side. side isthe "SIDE
Double-sided disc: A" recording/
The"SIDE A" recording/playback playback side,
side is opposite to the "SIDE A"
marked side. The "SIDE B"
recording/playback side is the
"SIDE A" marked side.
Push the section marked "PUSH CLOSE" on
the cover of disc insertion compartment, to close
the cover.
4 Turn the DVD Video Camera on ( _ or I"'! ).
When "DISC ACCESS" disappears, the DVD
Video Camera is ready for recording.
Note:
Immediately after a disc is inserted or recording is finished:
If the ACCESS/PC indicator is lit or blinking immediately
after a disc is inserted or recording is finished, then the disc
is spinning and disc information is being saved. Ifthe power
supply is cut off while this is happening, the disc may
become unusable. For this reason, the powercord must not
be unplugged and the battery must not be removed when
the ACC ESS/PC indicator is lit or blinking immediately after
a disc is inserted.
While the ACCESS/PC indicator is lit or blinking, do not
cause impact or vibration to the DVD Video Camera.
indicator
46
Loading ...
Loading ...
Loading ...