Loading ...
Loading ...
Loading ...
This section explains preparations for recording - setting up the DVD Video Camera and battery pack.
Setting Up the DVD Video Camera
Holding DVD Video Camera
Using Grip Belt
Insert your right hand from the bottom of
DVD Video Camera up to the base of your
thumb.
Putyour hand in a position where you can
easily operate the REC button, Photo
shot button, and the Zoom lever.
Adjust the length of grip belt so that the
DVD Video Camera is stable when you
press the REC button with your thumb.
1)Detach the belt.
2)Ajust the length of grip belt.
3)Attach the belt.
• VDR-M95PP
• VDR-M53PP/VDR-M55PP/VDR-M75PP
Note:
Do not adjust the grip belt while holding the DVDVideo Camera: Doing this could cause the DVD Video Camera to fall
and be damaged.
To use as a Hand Strap (Only for VDR-M95PP)
Using the Grip Belt as a hand strap makes it easier to carry the DVD Video Camera.
1 Detach the Grip Belt from the Video Camera. 2) Push the Lock button and pull the grip belt
1) Open the Lock cover, from the DVD Video Camera.
Support the DVD Video Camera securely by
the hand to avoid falling.
Open the lockcover while pinching the protection
portion of both ends.
2 Make it a hand strap.
1) Turn over the belt.
2) Pull the tip in the detection of the
arrow.
3) Attach the belt.
Lock button f_/_/,_ t _ _.
ock+ove +
Return the lockcover to the closed position
after pulling out the grip belt.
34
Loading ...
Loading ...
Loading ...