Loading ...
Loading ...
Loading ...
Q r_ra'al
Initializing DVD-RAM Disc or Card (Format Disc. Format Card)
• Take great care that power is not turned off during initialization. If the DVD
Video Camera is turned off during initialization and the initialization is
Before You Begin interrupted, incorrect initialization will result, and at worst, the data
recorded on disc or card before initialization was interrupted may be
damaged.
1Press the DISC NAVIGATION button.
2 Press the MENU button.
3 Choose "Format Disc" or "Format Card" on the
"Disc" or"Card" men u screen, and then press the
I_/11 button.
The screen forverifying "Format Disc" or"Format
Card" will appear.
4 Choose "YES", and then press the ,/ll button.
Choose "NO" to cancel initialization.
Format Disc
(When using
DVD-RAM disc)
j FormatCard
Note:
• Initialization will delete all the recorded contents on disc
or card. Be careful not to delete data by mistake.
• Be sure to use the AC adaptor when initializing disc or
card so that the DVD Video Camera is not turned off
midway. Ifinitialization is interrupted by power turning off,
the disc or card will not be initialized correctly, or it may be
damaged.
• It may not be possible to initialize a disc with many
scratches or dirt, Such a disc cannot be used.
• If you use a brand-new DVD-R disc, message"Disc is not
formatted" will appear. Initialize the disc, following the
subsequent messages (See page 47).
• This DVD Video Camera may not recognize some discs
or cards that have been initialized on PC or a device other
than this DVD Video Camera,
• If you attempt to initialize a disc or card in this DVD Video
Camera using a PC connected to the DVD Video Camera
via USB cable, the disc or card may not be initialized and
may be unusable on this DVD Video Camera.
(When using card)
When initializing one side of the disc is complete,
the DVD Video Camera will return to recording
pause mode.
125
Loading ...
Loading ...
Loading ...