Loading ...
Loading ...
Loading ...
215
6. Select Head Cleaning and press the OK button.
7. Press the start button to clean the print head. You see a message on the LCD screen during the
cleaning cycle.
Caution: Never turn off the product during a cleaning cycle or you may damage it.
When the cleaning cycle is finished, you see a completion message on the LCD screen.
8. Select Check and press the OK button.
9. Press the start button to print a nozzle check pattern and confirm that the print head is clean.
If you don’t see any improvement after cleaning the print head up to 3 times, turn off the product and wait
at least 12 hours. Then try cleaning the print head again. If quality still does not improve, run a Power
Cleaning. If there is still no improvement, contact Epson support.
Parent topic: Print Head Cleaning
Related tasks
Checking the Nozzles Using the Product Control Panel
Power Cleaning Using the Product Control Panel
Cleaning the Print Head Using a Computer Utility
Related topics
Loading Paper
Loading ...
Loading ...
Loading ...