Loading ...
Loading ...
Loading ...
The essentials
Replacing a blown fuse
Fig. 60 Image of a blown fuse.
Fig. 61 Removing or fitting a fuse
Preparation
●
Switch off the ignition, lights and all elec-
tric
al
equipment
.
●
Open the corresponding fuse box
››› page 43
Identifying a blown fuse
A fuse is blown if its metal strip is ruptured
››› Fig. 60.
●
Point a lamp at the fuse to see if it has
blown.
To replace a fuse
●
If necessary, remove the plastic pincers
from the fuse box cover.
●
Small fuses: lock the pincer in from above
››› Fig. 61 A.
●
Larger fuses: move the pincer sideways
over the fuse ››› Fig. 61 B.
●
Remove the relevant fuse.
●
Replace the blown fuse by one with an
identical amperage rating (same colour and
markings) and identical size.
●
Replace the cover.
Bulbs
Bulbs (12 V)
Full-LED headlights are designed to last the
lif
etime of
the c
ar and light bulbs cannot be
replaced. In case of headlight failure, go to
an authorised workshop to have it replaced.
Light source used for each function
Halogen headlights. Type
Dipped beam headlights H7 LL
Main beam headlights/day-
time running lights (DRL)
H15 (double element)
Side lights W5W
Turn signal PY21W NA LL
AFS bi-xenon main head-
light
Type
Daytime running lights (DRL) P21W SLL
Side lights W5W
Turn signal PY21W NA LL
Dipped beam / Main beam
Xenon bulb. Visit an
authorised workshop
for replacement.
Front fog light Type
Fog lights HB4
LED rear lights Type
Side/brake light LED
Turn signal WY21W
Reverse lights W16W
44
Loading ...
Loading ...
Loading ...