Loading ...
Loading ...
Loading ...
Operation
●
Adju
s
t
the head restraint according to the
correct seat position and secure it
››› page 145.
Removing the front head restraints in vehi-
cles with the lengthways direction adjust-
ment of the head restraints
●
If necessary, adjust the seat backrest so
that the head restraint can be fitted.
●
Push the head restraint up and backward
as far as it will go ›››
.
●
Place a flat object, e.g. a plastic card
2
B,
on both s
ide
s
between the seat backrest cov-
er and the end protector of the seat backrest
retaining bar and unlock the retaining bars
with a little pressure.
●
Completely pull out the head restraint.
Fitting the front head restraints in vehicles
with the lengthways direction adjustment of
the head restraints
●
Pull out the two retaining bars from the
head restraint as far as possible.
●
Correctly place the head restraint into the
guides on the seat backrest and insert it.
●
Push the head restraint down as far as pos-
sible until the two retaining bars are secured.
●
Adjust the head restraint according to the
correct seat position and secure it
››› page 145.
Removing the head restraints from the sec-
ond and third row of seats
●
Fold the backrest of the rear seat forwards
››› page 154.
●
Push the head restraint up as far as it will
go ›››
.
●
Pull out the head restraint ›
›
›
Fig. 152
1
with the button pressed.
●
Fold the backrest of the rear seat back-
w
ar
d
s until it is engaged.
Fitting the head restraints in the second and
third row of seats
●
Fold the backrest of the rear seat forwards
››› page 154.
●
Insert the head restraint into the guides on
the seat backrest.
●
Push the head restraint down while press-
ing the button
1
.
●
Fold the backrest of the rear seat backward
ag
ain u
nti
l it is engaged.
●
Adjust the head restraint to the correct po-
sition ››› page 144.
WARNING
Travelling with the head restraints removed
or improperly a
djusted increases the risk of
severe or fatal injuries in the event of acci-
dents and sudden braking or manoeuvres.
●
Alwa
ys fit and adjust the head restraint
properly whenever a person is occupying a
seat.
●
Refit any removed head restraints immedi-
ately so that passengers are properly protec-
ted.
●
All vehicle occupants must correctly adjust
the head restraint according to their height to
reduce the risk of back injuries in the event of
an accident. The upper edge of the head re-
straint must be as close as possible to the
same level as the top of your head and under
no circumstances below eye level. Keep the
back of your neck as close as possible to the
head restraint.
●
Never adjust the head restraint while the
vehicle is in motion.
CAUTION
When removing and fitting the head restraint,
make s
ure it does not hit the headliner of the
vehicle or the front seat backrest. Otherwise,
the interior roof and other parts of the vehicle
could be damaged.
146
Loading ...
Loading ...
Loading ...