Loading ...
Loading ...
Loading ...
The essentials
Control button
Electronic manual air conditioning
››› Fig. 51;
Climatronic
››› Fig. 51.
Buttons for the seat heating ››› page 147.
Climatronic: depending on the vehicle equipment there may be a button for the windscreen heating on the air conditioner control panel. The wind-
screen heating only works when the engine is running and switches off automatically after a few minutes.
Press the button to switch on or off the cooling system.
Climatronic: accept the temperature selection for the driver and front passenger sides. When the
button light is lit, the temperature settings on
the driver side also apply to the passenger side. Press the button or adjust the temperature control for the passenger side in order to set a different
temperature. No lamp lights up on the button.
Climatronic: automatic temperature, fan, and air distribution control. Press the button to switch on the function. The control lamp lights up on the
button.
Climatronic: press the
button to adjust the air conditioner for the rear seats, from the front seats back. The lamp is lit on the
button if the
feature is activated. The settings for the rear seats will be displayed. Press the button again to switch the function off or do not touch any other button
for around 10 seconds.
Climatronic: press the
button to use the heat that the engine produces. When the engine is still warm but the ignition switched off, the heat given
off by the engine can be used to keep the vehicle interior warm. The
button will light up when the function is switched on. The function will switch
off after around 30 minutes and if the battery level is low.
a)
Switch off.
Electronic manual air conditioning: turn the fan switch to setting 0.
Climatronic: Press the
button or adjust the fan manually to 0. The
button will light up when the device turns off.
a)
Depending on the version of the model.
››› in Introduction on page 176
››› page 176
39
Loading ...
Loading ...
Loading ...