User Manual - Page 26

For 2018 SEAT ALHAMBRA.

Loading ...
Loading ...
Loading ...
The essentials
Removing the child seat
The se
at
belt
must not be unfastened until
the vehicle has come to a standstill.
Press the red button on the buckle. The
latch plate is released from the buckle.
Guide the belt back by hand so that it rolls
up easily and the trim will not be damaged.
Remove the child seat from the vehicle.
in Safety instructions on page 76
Fix the child seat with the lower an-
c
hor point
s
(ISOFIX)ISOFIX system
Fig. 37 Version 2: identification of the anchor
points
f
or the c
hild seat on the vehicle seat
There are tw
o
r
etaining rings, the so-called
lower anchor points, on each rear seat or,
where applicable, on the front passenger
seat. The retaining rings are attached to the
seat frames.
Child seats with rigid mounting
Observe the manufacturer's instructions
when installing and removing the child seat.
Press the child seat onto the retaining rings
Fig. 37 in the direction of the arrow. The
child seat must be safely engaged and click
audibly into place.
Pull on both sides of the child seat to en-
sure that it is secure.
Child seat with adjustable retaining straps
Observe the manufacturer's instructions
when installing and removing the child seat.
Place the child seat on the seat cushion
and attach the retaining strap hooks to the
retaining rings ›› Fig. 37.
Tighten the straps evenly using the corre-
sponding adjustment device. The child seat
must sit flush against the vehicle seat.
Pull on both sides of the child seat to en-
sure that it is secure.
in Safety instructions on page 76
Securing a child seat using a Top Teth-
er r
et
ainin
g strap
Fig. 38 Upper retaining strap hooked in the
lug
g
ag
e compartment
Observe the manufacturer's instructions
when in
s
t
alling and removing the child seat
in Safety instructions on page 76.
Raise the head restraint behind the child
se
at
u
ntil it engages.
Secure the child seat to the lower anchor
points page 24.
Pull the upper child seat retaining strap
back to the seat backrest of the rear seat, be-
low or on both sides of the head restraint
(depending on the child seat model).
Hook the upper retaining strap to the corre-
sponding retaining ring (for Top Tether) on
the back of the seat backrest on the rear seat
Fig. 38.
24
Loading ...
Loading ...
Loading ...