Loading ...
Loading ...
Loading ...
Seats and head restraints
To activate the memory function of the vehi-
c
l
e k
ey
Important: a position must be memorised in
the memory.
●
Open the driver-side door.
●
Press and hold any memory button.
●
Within the following three seconds, push
the open button on the vehicle key. An au-
dible warning confirms the settings have
been activated.
Adjusting the wing mirrors for driving and
assigning driver seat settings to a vehicle
key
●
Activate the memory function of the vehicle
key
●
Adjust the front seat and the exterior mir-
rors.
●
Lock the vehicle. The settings are assigned
to the vehicle key.
To deactivate the memory function of the ve-
hicle key
Important: a position must be memorised in
the memory.
●
Press and hold the
SET
button.
●
Within the following 10 seconds, push the
open b
utt
on
on the vehicle key. An audible
warning confirms the settings have been de-
activated.
Initialising the seat position memory
The position memory system must be restar-
ted if, for example, the driver seat has been
changed.
Restarting deletes all memories and assign-
ments for the seat with position memory. The
memory buttons can then be reprogrammed
and the vehicle keys re-assigned.
●
Open the driver door and do not get into
the vehicle.
●
Operating the seat settings from outside
the vehicle.
●
Move the angle of the seat backrest com-
pletely forwards.
●
Release the control to set the angle and
then press again until an audible warning is
heard.
Note
The front passenger side exterior mirror auto-
matica
lly changes from the position stored
for reversing as soon as the vehicle moves
forward at a speed of at least 15 km/h
(9 mph) or when the gear selection lever is
changed to a position other than R.
Convenient entry function for the third
r
o
w of
seats
Fig. 157 Second row of seats: convenient en-
tr
y
f
unction controls
The outer seats of the second row can be fol-
ded t
o m
ak
e it easier to get in and out of the
third row of seats.
Folding down the second row seats
●
If necessary, open the belt loop and wind
up the seat belt by hand.
●
If necessary, remove the side head restraint
of the integrated child seat
›››
page 79.
●
If necessary, raise the armrests.
●
Remove any objects located in the footwell
of the second row of seats, where applicable
›››
.
»
149
Technical dataAdviceOperationEmergenciesSafety
Loading ...
Loading ...
Loading ...