Loading ...
Loading ...
Loading ...
Operation
An optimum range is obtained by keeping
the r
emot
e c
ontrol vertical, with the aerial
››› Fig. 196
A
pointing upwards. When doing
so
, do not
c
over the aerial with your fingers
or with the palm of your hand.
There must be a minimum distance of 2 me-
tres between the remote control and the vehi-
cle.
CAUTION
●
The radio fr
equency remote control con-
tains electronic components. Therefore, avoid
getting it wet and being knocked and protect
it from direct sunlight.
●
Use of inappropriate batteries may damage
the remote control. For this reason, always re-
place the used battery with another of the
same voltage, size and specifications.
For the sake of the environment
●
Plea
se dispose of old batteries so that they
do not harm the environment.
●
The remote control battery may contain
perchlorate. Observe the legal requirements
for their disposal.
Programming the auxiliary heater
The heater or ventilation inside the vehicle
c
an be pr
ogr
ammed for a certain period.
Before programming, check that the day is
correctly set in the Auxiliary heater -
day of the week menu ›››
.
En
ab
lin
g the Auxiliary heater menu on
the instrument panel
●
From the main menu, select the Auxili-
ary heater submenu and press the
OK
button on the windscreen wiper lever.
●
OR: pr
ess the
or
arrow buttons on the
multifunction steering wheel until the Aux-
iliary heater menu is displayed.
Menu op-
tions
Description
Switching
on
Switching
off
The auxiliary heater can be set to come
on automatically if required. To do so,
select a timer:
– The timer is displayed marked with a
.
– Only one timer can be selected. If a
timer has been selected, Prog. ON
will be displayed on the screen. If no
timer has been selected, the dash
panel display will show Prog. OFF.
– To modify the programmed timer, se-
lect another timer or select the Off
option.
Timer 1
Timer 2
Timer 3
Three different timers (hh.mm) can lat-
er be selected using the On option. If
the auxiliary heater is to be switched
on for just a certain day of the week,
select the day of the week and the
time for the auxiliary heater to come
on.
Menu op-
tions
Description
Duration
The operating time may vary between
10 and 60 minutes and can be set to
5-minute intervals.
Operating
mode
Set to heat or ventilate the vehicle in-
terior when the auxiliary heater is
switched on.
Day Set the current day of the week.
Factory
settings
The predefined factory values for the
functions of this menu are restored.
Back This returns to the main menu.
Checking programming
If
the timer h
a
s been switched on after
switching the ignition off, the light on the
button will remain lit for around 10 seconds.
WARNING
Never program the independent heating sys-
tem to be activ
ated and operated in closed,
unventilated areas. The auxiliary heater
fumes contain carbon dioxide, an odourless
and colourless toxic gas. Carbon monoxide
can cause people to lose consciousness. It
can also cause death.
182
Loading ...
Loading ...
Loading ...