Loading ...
Loading ...
Loading ...
The essentials
Toggle between memories with the ignition
on and the memor
y
di
splayed
Press the
button on the windscreen
w
iper l
ev
er or the
button of the multifunc-
tion s
t
eerin
g wheel.
Menu Function
MFD from de-
parture
Display and storage of the values for
the journey and the consumption
from when the ignition is switched
on to when it is switched off.
If the journey is continued in less
than 2 hours after the ignition is
switched off, the new data is added
to the data already stored in the
memory. The memory will automati-
cally be deleted if the journey is in-
terrupted for more than 2 hours.
MFD from re-
fuelling
Display and storage of the values for
the journey and the consumption.
By refuelling, the memory will be
erased automatically.
MFD total
calculation
The memory records the values for a
specific number of partial trips, up
to a total of 19 hours and 59 mi-
nutes or 99 hours and 59 minutes,
or 1999.9 km or 9999 km, depend-
ing on the model of instrument pan-
el. On reaching either of these lim-
its
a)
, the memory is automatically
erased and starts to count from 0
again.
a)
It varies according to the instrument panel version.
Erasing a memory manually
●
Select the memory that you wish to erase.
●
Hold the
button of the multifunction
s
t
eerin
g wheel or the
button of the multi-
f
u
nction wheel
pressed down for about 2 sec-
onds.
Personalising the displays
In the Easy Connect system you can adjust
which of the possible displays of the MFD can
be shown on the instrument panel display
with the
button and the
S
ET
TINGS
function
b
utt
on ›
››
page 123.
Data summary
Menu Function
Current fuel
consumption
The current fuel consumption dis-
play operates throughout the
journey, in litres/100 km; and
with the engine running and the
vehicle stopped, in litres/hour.
Average fuel
consumption
After turning on the ignition, aver-
age fuel consumption in li-
tres/100 km will be displayed af-
ter travelling about 300 metres.
Otherwise horizontal lines are
displayed. The value shown is up-
dated approximately every 5 sec-
onds.
Menu Function
Operating
range
Approximate distance in km that
can still be travelled with the fuel
remaining in the tank, assuming
the same style of driving is main-
tained. This is calculated using
the current fuel consumption.
Travelling
time
This indicates the hours (h) and
minutes (min) since the ignition
was switched on.
Journey
Distance covered in km (m) after
switching on the ignition.
CNG quality
Whenever you refuel the quality
of the natural gas is automatically
verified and is displayed when
the ignition is switched on. The
display is made in a percentage
of between 70% and 100%. The
greater the percentage displayed
the lower the consumption may
be.
Average speed
The average speed will be shown
after a distance of about 100 me-
tres has been travelled. Otherwise
horizontal lines are displayed.
The value shown is updated ap-
proximately every 5 seconds.
Digital dis-
play of speed
Current speed displayed in digital
format.
»
39
Loading ...
Loading ...
Loading ...