Loading ...
Loading ...
Loading ...
Instruments and warning/control lamps
Time
●
To set the time, keep the button ›
›
›
Fig. 125
4
pressed for more than 3 seconds to select
the hour or minut
e di
s
play.
●
To continue setting the time, press button
4
. Hold button down to scroll through the
number
s
quic
kly.
●
Once you have set the time, the second
count will begin from 0 automatically.
●
Press the button
4
again in order to finish
settin
g the time.
●
Onc
e
you have set the time, the time indi-
cator will disappear and the changes will re-
main.
The time can also be set on the Easy Connect
system using the
button and the function
b
utt
on
SETTINGS > Date and time
››› page 123.
Compass
With the ignition on and the navigation sys-
tem on, the cardinal point corresponding to
the direction of travel of the vehicle is dis-
played on the instrument panel.
Selector lever position
The selected gear is displayed on the side of
the selector lever and on the instrument pan-
el display. In positions D and S, and with the
Tiptronic, the corresponding gear is also dis-
played.
Recommended gear (manual gearbox)
The r
ecommended gear in order to save fuel
is displayed on the instrument panel while
you are driving ›››
page 41.
Second speed display (mph or km/h)
In addition to the speedometer, the speed
can also be displayed in a different unit of
measurement (in miles or in km per hour).
This option cannot be deactivated in models
destined for countries in which the second
speed must always be visible.
The second speed display can be adjusted in
the Easy Connect system by means of the
button and the function button SETTINGS >
Units ›
›
›
page 123.
Speed warning
When the speed setting is exceeded, this will
be indicated on the instrument panel display.
This is very useful, for example when using
winter tyres that are not designed for driving
at the maximum speed of the vehicle
›››
page 42.
The speed warning settings can be adjusted
in the Easy Connect system by means of the
button and the function button SET-
TINGS > Driver Assistance
›
›
›
page 123.
Start-Stop operating display
Updated information relating to the status is
displayed on the instrument panel
››› page 204.
Low consumption driving status (ECO)*
Depending on the equipment, when driving,
the “ECO” display appears on the instrument
panel when the vehicle is in low consump-
tion status due to active cylinder manage-
ment (ACT
®
)* ››› page 200.
Identifying letters on engine (MKB)
Hold the button ››› Fig. 125
4
down for more
th
an 15 sec
ond
s to display the identifying
letters of the vehicle engine (MKB). To do
this, the ignition must be switched on and
the engine switched off.
WARNING
Observe the safety warnings ›››
in Warning
symbols on p
age 122.
WARNING
Even though outside temperatures are above
freezin
g, some roads and bridges may be icy.
●
At outside temperatures above +4°C
(+39°F), even when the “ice crystal” symbol
is not visible, there may still be patches of ice
on the road.
●
The outside temperature sensor takes a
guideline measurement.
»
119
Technical dataAdviceOperationEmergenciesSafety
Loading ...
Loading ...
Loading ...