Loading ...
Loading ...
Loading ...
Emergencies
Anchoring the front tow line
Fig. 108 Right side of the front bumper: re-
mo
v
e the lid.
Fig. 109 Right side of the front bumper: tow-
line anc
hor
ag
e screwed in.
The front towline anchorage is only mounted
if
the
v
ehicle has to be towed.
There is a cover with an opening into which
the towline anchorage is screwed on the right
part of the front bumper.
–
Take the towline anchorage from the on-
board tool set.
–
Remove the front cover by pressing down
on its left-hand side ››› Fig. 108.
–
Bolt the anchorage to its limit to the left, in
the direction of the arrow ››› Fig. 109.
After use, unscrew the towline anchorage
and fit the cover back on the bumper. Put the
towline anchorage back in the vehicle tool
kit. The towline anchorage should always be
kept in the vehicle.
Rear towline anchorage
Fig. 110 Right side of the rear bumper: cover-
c
ap
.
Fig. 111 Right side of the rear bumper: tow-
line anchorag
e screwed in.
The rear towline anchorage should only be
mou
nt
ed if
you wish to tow another vehicle.
Vehicles with towline anchorage
On the right of the rear bumper there is a cov-
er which covers a threaded hole.
–
Take the towline anchorage out of the vehi-
cle tool set ››› page 97.
–
To open the cover, press the top right side
››› Fig. 110.
–
Screw the towline anchorage into the screw
connection as far as it will go ››› Fig. 111
and tighten with the wheel brace.
After use, unscrew the towline anchorage
and put it back in the vehicle tool kit. Replace
the cover on the bumper. The towline anchor-
age should always be kept in the vehicle.
102
Loading ...
Loading ...
Loading ...