Loading ...
Loading ...
Loading ...
Operation
programmed speed and ACC status will be
di
s
p
layed ››› Fig. 196.
What ACC settings are possible?
●
Setting your speed ››› page 220.
●
Setting your distance ››› page 220.
●
Connecting and activating the ACC
››› page 220.
●
Disconnecting and deactivating the ACC
››› page 220.
●
Adjusting the default distance level at the
start of your journey ››› page 220.
●
Adjusting the driving profile ››› page 221.
●
Conditions in which the ACC does not react
››› page 221.
Setting speed
To set your speed, move the third lever loca-
ted in position
1
upwards or downwards un-
ti
l
the de
sired speed is shown on the instru-
ment panel display. The speed adjustment is
made at 10 km/h (6 mph) intervals.
Once you are driving, if you wish to set the
current speed as the vehicle’s cruise speed
and activate the ACC, press the button
››› Fig. 199. If you wish to increase or reduce
speed by intervals of 1 km/h (0.6 mph),
move the lever to position
2
›
›
›
Fig. 198 or
press the button, respectively.
The set speed can be changed when the ve-
hicle is stopped or during driving, as you like.
Any modification to the programmed speed
will be shown on the bottom left part of the
instrument panel display ››› Fig. 196.
Setting your distance level
To increase/reduce the distance level, press
the rocker switch towards the left/right
››› Fig. 199
A
.
The in
s
trument
panel display shows the mod-
ification of the distance level. There are 5 dis-
tance levels to choose from. SEAT recom-
mends level 3. The set distance can be
changed when the vehicle is stopped or dur-
ing driving, as you like ›››
.
C
onnectin
g and activ
ating the ACC
To connect and activate the ACC, the position
of the gearbox selector lever, the vehicle
speed and the position of the third level of
the ACC must all be taken into account.
●
With a manual gearbox, the gearbox selec-
tor lever must be in any gear except first, and
speed must be greater than approximately 30
km/h. With an automatic gearbox, the gear-
box selector lever must be in position D or S.
●
To activate the ACC, with the third lever in
position
1
press the b
utt
on or mo
ve the
third lever of the ACC to position
2
›››
Fig. 198. At this
point, the image of the
ACC on the instrument panel display will
switch to Active mode ››› Fig. 196.
When the ACC function is active, the vehicle
travel
s at a set speed and distance from the
vehicle ahead. Both speed and distance can
be changed at any time.
Disconnecting and deactivating the ACC
To disconnect the ACC move the lever to the
0
position ›
›› Fig. 198
(en
gaged). An ACC
deactivated message appears and the
function is totally deactivated.
If you do not wish to disconnect the ACC, just
to switch it temporarily to inactive mode
(Standby), move the third lever to position
3
››› Fig. 198 or pres
s the brake pedal.
It will also switch to inactive mode (Standby)
if the vehicle is stopped and the driver door
is opened.
Adjusting the default distance level at the
start of your journey.
In wet road conditions, you should always set
a larger distance with regard to the vehicle in
front than when driving in dry conditions.
The following distances can be preselected:
●
Very short
●
Short
●
Media
●
Long
●
Very long
220
Loading ...
Loading ...
Loading ...