Loading ...
Loading ...
Loading ...
Operation
●
Set
the air di
s
tribution regulator
››› Fig. 175
3
to the air flow configuration
de
s
ir
ed: (towards the windscreen), (to-
wards the chest), (towards the footwell)
and (towards the windscreen and foot-
well).
Interior cooling
When the air conditioning is switched on, the
temperature and the air humidity go down.
This way, if the outside humidity is extreme,
the air conditioning prevents the misting of
the windows and therefore, comfort is im-
proved.
●
Turn on the cooling system using the
button (the button light turns on).
●
Turn the temperature control switch until
the desired interior temperature is reached.
●
Turn the blower switch to any of the set-
tings 1-4.
●
Set the air distribution control to the air
flow configuration desired: (towards the
windscreen), (towards the chest), (to-
wards the footwell) and (towards the wind-
screen and footwell).
Demisting the windscreen
●
Turn air distribution to .
●
Turn the fan control to one of the two levels
depending on the speed required.
●
Rotate the temperature control to the de-
sired level of comfort.
●
Close the central outlets.
●
Open and turn the side outlets towards the
windows.
If the air conditioning does not work, this
may be due to the following reasons:
●
The engine is stationary.
●
The fan blower is switched off.
●
The outside temperature is lower than +3°C
(+37°F).
●
The air conditioning system compressor
has been temporarily switched off because of
an increased engine coolant temperature.
●
The air conditioner fuse is faulty.
●
Another fault in the vehicle. Have the air
conditioning checked by a specialised work-
shop.
172
Loading ...
Loading ...
Loading ...