Loading ...
Loading ...
Loading ...
Lights and visibility
Daytime running lights
The daytime running lights consist of individ-
ual lights, inte
grated in the front headlights.
By connecting the daytime running lights,
these lights are switched on
1)
›››
.
The daytime ru
nning lights switch on every
time the ignition is switched on, if the switch
is in positions or , according to the level
of exterior lighting.
When the light switch is in position , a
light sensor automatically switches dipped
beam on and off (including the control and
instrument lighting) or the daytime running
lights depending on the level of exterior
lighting.
WARNING
●
Never drive w
ith daytime lights if the road
is not well lit due to weather or lighting con-
ditions. Daytime lights do not provide
enough light to illuminate the road properly
or be seen by other road users.
●
On vehicles with rear lights with bulbs,
when activating the daytime running light
the rear lights are not switched on. A vehicle
which does not have the rear lights on may
not be visible to other drivers in the dark-
ness, in the case of heavy rain or in condi-
tions of poor visibility.
Fog lights
Fig. 148 Dash panel: light control.
Switching on the front fog lights*
●
Pull the light switch to the first point
›
›
›
Fig. 148
1
, from positions , or
.
The symbo
l
in the light switch lights up.
Switching on the rear fog light (vehicles with
front fog lights)
●
Completely pull the light switch
2
from
po
s
ition
, or . The lamp on the in-
strument panel lights up.
Switching on the rear fog light (vehicles with
no front fog lights)
●
Completely pull the light switch
2
from
po
s
ition
, or . This type of switch
only has one position. The lamp on the in-
strument panel lights up.
Turn signal and main beam lever
Read the additional information carefully
›››
page 32
Parking lights
●
Switch the ignition off and remove the key
from the lock.
●
Move the turn signal lever up or down to
turn the right or l
eft-hand parking lights on,
respectively.
Convenience turn signals
For the one-touch signalling, when the igni-
tion is switched on, move the lever as far as
possible upwards or downwards and release
the lever. The turn signal will flash three
times.
One-touch signalling is activated and deacti-
vated in the Easy Connect system via the
button and the function button SETTINGS >
Lights > One-touch signalling
›
›
›
page 34.
»
1)
On vehicles equipped with rear LED lights, the rear
side light i
s switched on as well.
147
Technical dataAdviceOperationEmergenciesSafety
Loading ...
Loading ...
Loading ...