Loading ...
Loading ...
Loading ...
Opening and closing
●
The t
urn s
ign
al light will flash once on clos-
ing and activating the alarm.
When does the system trigger an alarm?
The system triggers an alarm, if the following
unauthorised actions are carried out when
the vehicle is locked:
●
Mechanical opening of the vehicle with the
vehicle key without switching on the ignition
in the next 15 seconds (in certain markets,
such as the Netherlands, the alarm is activa-
ted immediately).
●
A door is opened.
●
Opening the bonnet.
●
The rear lid is opened.
●
Ignition switched on with a non-validated
key.
●
Movements in the driving compartment
(vehicles with a volume sensor).
●
Towing of the vehicle
1)
.
●
Vehicle tilt angle
1)
.
●
Undue manipulation of the alarm.
●
Battery handling.
In this case, the acoustic signals will go off
and the turn signal will flash for approximate-
ly 30 seconds. This cycle may be repeated up
to 10 times depending on the country.
Opening all the doors in manual mode
In vehicles without an alarm, when opening
the driver door manually, all doors are
opened.
How to switch the alarm off
To deactivate the anti-theft alarm, turn the
key in the opening direction, open the door
and switch the ignition on, or press the un-
lock button on the remote control.
In vehicles equipped with an anti-theft alarm
system, you have 15 seconds to insert the
key in the ignition lock and activate the igni-
tion if the vehicle is opened using the driver
door key.
Otherwise, the alarm will trigger for 30 sec.
and the ignition will be blocked.
Note
●
After 28 d
ays, the indicator light will be
switched off to prevent the battery from
draining if the vehicle has been left parked
for a long period of time. The alarm system
remains activated.
●
The alarm will trigger again if attempts are
made to open another protection zone.
●
The alarm system can be activated or deac-
tivated using the radio frequency remote con-
trol ››› page 130.
●
The anti-theft a
larm is not activated when
the vehicle is locked from within using the
central locking button .
●
If the vehicle battery is run down or flat
then the anti-theft alarm will not operate cor-
rectly.
●
Vehicle monitoring remains active even if
the battery is disconnected or not working for
any reason.
●
The alarm is triggered immediately if one of
the battery cables is disconnected while the
alarm system is active.
Vehicle interior monitoring and anti-
t
o
w sy
stem*
Monitoring or control function incorporated
in the anti-thef
t
al
arm* which detects unau-
thorised vehicle entry by means of ultra-
sound.
Activation
–
It is automatically switched on when the
anti-theft alarm is activated.
Deactivation
–
Open the vehicle with the key, either me-
chanically or by pressing the button on
the remote control. If the vehicle is opened
»
1)
With vehicles fitted with a tow-away protection
139
Technical dataAdviceOperationEmergenciesSafety
Loading ...
Loading ...
Loading ...