Loading ...
Loading ...
Loading ...
Operation
●
Adju
s
t
the vents so that the air flow is di-
rected slightly upwards.
Change between degrees Centigrade and de-
grees Fahrenheit
The units of degrees can be changed via the
Easy Connect system using the
button
and the f
u
nction b
utton SETTINGS >
Units > Temperature.
Automatic mode
Automatic mode is used to maintain a con-
stant temperature and demist the windows
inside the vehicle.
●
Set a interior temperature between +16°C
(+64°F) and +29°C (+84°F).
●
Adjust the vents so that the air flow is di-
rected slightly upwards.
●
Press the button, AUTO is displayed on
the screen.
Automatic mode is switched off by pressing
the air distribution buttons or increasing or
decreasing the blower speed. However, the
temperature remains regulated.
Adjusting the temperature
●
When you switch on the ignition, control
1
››› Fig. 176 can be used t
o set the required in-
terior temperature.
It is possible to select interior temperatures
from +16°C (+64°F) t
o +29°C (+84°F). In this
range the temperature is regulated automati-
cally. If a temperature below +16°C (+64°F) is
selected, “LO” is displayed on the screen. If a
temperature above +29°C (+84°F) is selected,
“HI” is displayed on the screen. At both ex-
tremes, Climatronic works at maximum cool-
ing or heating power, respectively. The tem-
perature is not regulated.
In the event of prolonged, irregular distribu-
tion of the air flow from the outlets (particu-
larly the footwells) and significant differen-
ces in temperature, e.g. on leaving the vehi-
cle, sensitive people may catch cold.
Fan regulation
Climatronic automatically regulates blower
speed according to the interior temperature.
It is possible, however, to set the blower
speed to suit requirements.
●
Press the
2
buttons to increase or reduce
f
an s
peed.
C
limatronic will switch off when the blower
switches off.
Turn on windscreen defrost
●
Press the button
›››
Fig. 176.
Switching off windscreen defrosting
●
Press the button several times or
press the button.
The temperature is regulated automatically.
The air output from the vents ››› Fig. 173
2
is increased.
WARNING
Read and observe the safety warnings ›››
in
General
notes on page 166.
Note
●
A vi
sit to the specialised service once a
year is recommended to clean the Climatronic
system.
●
The interior temperature sensor is at the
bottom. Do not cover it with stickers or the
like, as this could have a negative effect on
Climatronic operations.
174
Loading ...
Loading ...
Loading ...