Loading ...
Loading ...
Loading ...
Emergencies
Dipped beam headlight
Fig. 114 In the engine compartment: remove
the lid.
Fig. 115 In the engine compartment: dipped
be
am he
a
dlight.
–
Raise the bonnet.
–
Mo
v
e the loop ›
›› Fig. 114
1
in the direc-
tion of
the arr
o
w and remove the cover.
–
Remove the bulb connector ››› Fig. 115
2
.
–
Unclip the retainer spring ›
›
›
Fig. 115
3
pressing inwards to the right.
–
Extract the bulb and fit the replacement so
th
at
the lug on the b
ase fits into the recess
on the reflector.
–
Fit the connector.
–
Fit the cover and close the strap. Make sure
that the gasket sits well on the casing cover
during the operation.
–
Check whether the new bulb is working.
Turn signal light and DRL(daytime
running light)/sidelight
1)
Fig. 116 In the engine compartment: turn sig-
n
al
light
bulb
1
and DRL (daytime running
light) b
u
l
b
2
.
–
Raise the bonnet.
–
Turn the bulb holder ›
›
›
Fig. 116
1
or
2
to
the l
ef
t
and pull.
–
Remove the bulb by pressing on the bulb
holder and turning it anticlockwise at the
same time.
–
Installation involves all of the above steps
in reverse sequence.
1)
In headlight versions with LED DRL, this light
source c
annot be replaced. It is designed to last the
length of the car’s service life. In case of failure, go
to an authorised workshop to have it replaced.
108
Loading ...
Loading ...
Loading ...