Loading ...
Loading ...
Loading ...
Emergencies
Changing bulbs
Fig. 118 Luggage compartment: access to the
bo
lt
sec
uring the tail light unit.
Fig. 119 Retaining tabs on reverse side of tail
light
.
Follow the steps indicated:
Chec
k
whic
h of the bulbs is defective.
Open the rear lid.
1.
2.
Remove the lid, levering the flat side of
a screwdriver into the recess
››› Fig. 118
1
.
R
emo
v
e the bulb connector
2
.
Un
s
c
rew the bolt securing the light
3
by hand or using a screwdriver.
R
emo
v
e the light from the body, gently
pulling it toward you, and place on a
clean, smooth surface.
Remove the bulb holder unlocking the
retaining tabs ››› Fig. 119
A
.
Ch
an
g
e the damaged bulb.
To refit follow the steps in reverse order,
taking special care when fitting the bulb
holder. The securing tabs must click into
place.
CAUTION
Take care when removing the rear light unit to
make s
ure there is no damage to the paint-
work or any of its components.
Note
●
Make s
ure you have a soft cloth ready to
place under the glass on the rear light unit, to
avoid any scratches.
●
For LED lights, you can only change the turn
signal and reverse light bulbs.
3.
4.
5.
6.
7.
8.
9.
Number plate light
–
Insert the flat part of a screwdriver into the
speci
al slot and remove the bulb.
–
Remove the bulb holder, by turning it until
it is free.
–
Change the bulb.
–
Replace the bulb holder, by turning it until
it fits fully.
–
Fit the light into the space and press until
you hear a “click”.
Side turn signals
Fig. 120 Turn signal integrated in the rear
v
iew mirr
or
The side turn signals are LEDS and are inte-
gr
at
ed in the r
ear view mirrors.
110
Loading ...
Loading ...
Loading ...