Loading ...
Loading ...
Loading ...
#
Guide Top Tether belt 4 under head
restraint 1 between the two head restraint
bars.
#
Hook Top Tether hook 5 of Top Tether belt
4 without twisting into Top Tether anchor‐
age 3.
#
Tension Top Tether belt 4. Always comply
with the child restraint system manufactur‐
er's installation instructions when doing so.
#
Fold down cover 2 of Top Tether anchorage
3.
#
If necessary, slide head restraint 1 down‐
wards (/ page 92). Make sure that you
do not interfere with the correct routing of
Top Tether belt 4.
Securing the child restraint system with the
seat belt
Securing the child restraint system with the
seat belt on the rear seat
&
WARNING Risk of injury if the rear
bench seat/rear seat and seat backrest
are not engaged
If the rear bench seat/rear seat and seat
backrest are not engaged they could fold for‐
wards, e.g. when braking suddenly or in the
event of an accident.
R
If this is the case, the vehicle occupant
would be forced into the seat belt by the
rear bench seat/rear seat or by the seat
backrest. The seat belt cannot protect as
intended and could result in additional
injury.
R
Objects or loads in the trunk/cargo com‐
partment cannot be restrained by the
seat backrest.
#
Make sure that the seat backrest and
the rear bench seat/rear seat are
engaged before every trip.
If the rear seat backrest is not engaged and
locked, the red lock verification indicator will be
visible.
When installing a belt-secured child restraint
system, observe the following:
O
Always comply with the manufacturer's
installation and oper ating instructions for
the child restraint system used.
O
When using a category 0/0+ baby car
seat and a category I rearward-facing
child restraint system on a rear seat:
adjust the front seat so that the seat does
not touch the child restraint system.
O
When using a category I forward-facing
child restraint system: remove the head
restraint from the respective seat, if possi‐
ble.
Occupant safety
59
Loading ...
Loading ...
Loading ...