A- Class Owner's Manual - Page 423

For 2019 A 220 Sedan. Also, The document are for others Mercedes-Benz models: 2019 A- CLASS

Loading ...
Loading ...
Loading ...
R
Tire Pressure Monitor Active: the teach-in
process of the system is not yet complete.
The tire pressures are already being moni
tored.
#
Compare the tire pressure with the recom
mended tire pressure for the current operat
ing condition (/ page 420). Observe the
notes on tire temperature (/ page 419).
%
The values displayed in the multifunction dis
play may deviate from those of the tire pres
sure gauge as they refer to sea level. At high
altitudes, the tire pressure value indicated by
a pressure gauge are higher than those
shown by the on-board computer. In this
case, do not reduce the tire pressure.
Make sure to observe the following further rela
ted subject:
R
Notes on tire pressure (/ page 419)
Restarting the tire pressure monitoring sys
tem
Requirements:
R
The recommended tire pressure is correctly
set for the respective operating status on
each of the four wheels (/ page 419).
Restart the tire pressure monitoring system in
the following situations:
R
The tire pressure has changed.
R
The wheels or tires have been changed or
newly installed.
On-board computer:
4
Service
5
Tires
#
Swipe downwards on Touch Control on the
left-hand side of the steering wheel.
The Use Current Pressures as New Refer-
ence Valuesmessage is shown in the multi
function display.
#
To begin restart, press Touch Control on the
left-hand side of the steering wheel.
The Tire Press. Monitor Restarted message is
shown in the multifunction display.
Current warning messages are deleted and
the yellow h warning lamp goes out.
After you have been driving for a few
minutes, the system checks whether the cur
rent tire pressures are within the specified
range. The current tire pressures are then
accepted as reference values and monitored.
Make sure to observe the following further rela
ted subject:
R
Notes on tire pressure (/ page 419)
Radio equipment approval of the tire pres
sure monitoring system
Radio equipment approval numbers
Country Radio equipment approval
number
Canada IC: 4008C-TSSRE4A
USA FCC ID: YGOTSSRE4A
Further information on the declaration of con
formity for wireless vehicle components
(/ page 26).
424
Wheels and tires
Loading ...
Loading ...
Loading ...