Loading ...
Loading ...
Loading ...
4
95
ACCESS
P
ANORAMIC
S
UNROOF
Component which has a tinted glass
panoramic surface to increase the light
and visibility in the passenger compart-
ment.
Fitted with an electric blind in several
sections to improve temperature and
noise related comfort.
If the blind meets an obstacle dur-
ing operation, you must reverse the
movement of the blind. To do this,
press the control concerned.
When the driver operates the blind
control, he must ensure that no one
is preventing correct closing of the
blind.
The driver must ensure that pas-
sengers use the blind correctly.
Be aware of children when operat-
ing the blind.
- manual mode
) Pull or press control A gently.
The blind stops when you release
the control.
- automatic mode
) Pull or press control A fi rmly.
One press opens or closes the
blind completely.
Pressing the control again stops
the blind.
Safety anti-pinch
In automatic mode and at the end of
its travel, if the blind meets an obstacle
while closing it stops and moves back
slightly.
One-touch electric blind
There are two options for opening and
closing:
Reinitialisation: if the blind's sup-
ply is cut off while it is moving, the
safety anti-pinch must be reinitial-
ised:
) press the control until the blind
is fully closed,
) continue to press for at least
3 seconds. A slight movement
of the blind will then be notice-
able, confi rming the reinitialisa-
tion.
If the blind re-opens during a clos-
ing manoeuvre, and immediately
after it stops:
) pull the control until the blind is
fully open,
) press the control until the blind
is fully closed.
The safety anti-pinch function is
not operational during these op-
erations.
Loading ...
Loading ...
Loading ...