Loading ...
Loading ...
Loading ...
10
171
CHECKS
R
UNNING OUT OF FUEL
(
DIESEL
)
1.6 litre HDi engine
) Fill the fuel tank with at least fi ve litres
of diesel.
) Open the bonnet.
) If necessary, unclip the styling cover
for access to the priming pump.
) Squeeze and release the priming
pump repeatedly until resistance is
felt (there may be resistance at the
fi rst press).
) Operate the starter until the engine
starts (if the engine does not start at the
fi rst attempt, wait around 15 seconds
before trying again).
) If the engine does not start after a
few attempts, operate the priming
pump again then start the engine.
) Clip the styling cover back in place.
) Close the bonnet.
2 litre HDi engine
) Fill the fuel tank with at least fi ve litres
of Diesel.
) Open the bonnet.
) If necessary, unclip the style cover
for access to the priming pump.
) Squeeze and release the priming
pump repeatedly until fuel appears
in the transparent pipe.
) Operate the starter until the engine
starts (if the engine fails to start at the
fi rst attempt, wait around 15 seconds
before trying again).
) If the engine fails to start after a few
attempts, operate the priming pump
again, then the starter.
) Put the style cover back in position
and clip it in place, ensuring that it
has clipped correctly.
) Close the bonnet.
If the engine does not start fi rst
time, don't keep trying. Start the
procedure again from the begin-
ning.
On vehicle fi tted with HDi engines, the
fuel system must be primed if you run
out of fuel; refer to the engine compart-
ment view on the "Diesel engine" page.
If the tank on your vehicle is fi tted with
a misfuel prevention device, refer to the
section "Access - § Misfuel prevention
(Diesel)".
Loading ...
Loading ...
Loading ...