Loading ...
Loading ...
Loading ...
6
12
0
FITTINGS
High load retaining net
Hooked onto the special upper and low-
er fi xings, this permits use of the entire
loading volume up to the roof:
- behind the rear seats (row 2),
- behind the front seats (row 1) when
the rear seats are folded.
To use it in row 1:
) open the covers of the upper fi xings 1 ,
) unroll the high load retaining net,
) position one of the ends of the net's
metal bar in the corresponding up-
per fi xing 1 , then do the same with
the other end,
) slacken the straps fully,
) fi x the snap hook of each of the
straps on the corresponding bar 3 ,
located under the cushion of the
rear seats,
) fold the rear seats,
) tighten the straps,
) check that the net is hooked and
tightened correctly.
To use it in row 2:
) fold or remove the load space cover,
) open the covers of the upper fi xings 2 ,
) unroll the high load retaining net,
) position one of the ends of the net's
metal bar in the corresponding up-
per fi xing 2 , then do the same with
the other end,
) fi x the snap hook of each of the
straps in the corresponding ring 4 ,
located on the rear seats mecha-
nism support,
) tighten the straps,
) check that the net is hooked and
tightened correctly.
When positioning the net, check
that the strap loops are visible from
the boot; this will make slackening
or tightening easier.
This net can be stored in the stor-
age tray on the fl oor.
Loading ...
Loading ...
Loading ...