Loading ...
Loading ...
Loading ...
1
1
1
90
PRACTICAL INFORMATION
Fitting a steel or "space-saver"
type spare wheel
If your vehicle is fi tted with alloy
wheels, it is normal to notice, when
tightening the bolts on fi tting, that
the washers do not come into con-
tact with the steel or "space-saver"
type spare wheel. The wheel is
secured by the conical contact of
each bolt.
Access to the spare wheel
The spare wheel is supported by a
winch system underneath the rear of
the vehicle.
According to country, the spare wheel
may be steel, alloy or of the "space-
saver" type.
Taking out the wheel
) Lift up the cover eyelet, pull the cov-
er upwards, then pivot it to open the
fl ap; these actions release the winch
and give access to its control nut.
) Unscrew this nut fully, using the
wheelbrace 1 , to unwind the winch
cable.
) Once the wheel/box is on the
ground, disengage the assembly
from the rear of the vehicle.
) Detach the hook mechanism to release
the wheel/box assembly, as shown in
the illustration.
) Take out the black plastic centring
cone.
Access to the set of tools
) Lift up the wheel to release the set
of tools.
) To open the storage box, slide the
cover until half open, then pull it off.
Loading ...
Loading ...
Loading ...