Loading ...
Loading ...
Loading ...
1
1
!
1
83
PRACTICAL INFORMATION
Beware of discharges of fl uid.
The expiry date of the fl uid is indi-
cated on the cartridge.
The sealant cartridge is designed
for single use; even if only partly
used, it must be replaced.
After use, do not discard the car-
tridge into the environment, take
it to an authorised waste disposal
site or a PEUGEOT dealer.
Do not forget to obtain a new sealant
cartridge, available from PEUGEOT
dealers or from a qualifi ed workshop.
Removing the cartridge
) Stow the black pipe.
) Detach the angled base from the
white pipe.
) Support the compressor vertically.
)
Unscrew the cartridge from the bottom.
Checking tyre pressures /
inflating accessories
You can also use the compressor, without
injecting any product, to:
- check or adjust the pressure of your
tyres,
- infl ate other accessories (balls, bicycle
tyres...).
) Turn the selector A to the
"Air" position.
) Uncoil the black pipe H fully.
) Connect the black pipe to
the valve of the wheel or accessory.
If necessary, fi t one of the adaptors
supplied with the kit fi rst.
) Connect the compressor's electri-
cal connector to the vehicle's 12 V
socket.
) Start the vehicle and let the engine
run.
) Adjust the pressure using the
compressor (to infl ate: switch B in
position "I" ; to defl ate: switch B in
position "O" and press button C ),
according to the vehicle's tyre
pressure label or the accessory's
pressure label.
) Remove the kit then stow it.
Loading ...
Loading ...
Loading ...