Loading ...
Loading ...
Loading ...
6
12
3
FITTINGS
High load retaining net
Hooked onto the special upper and low-
er fi xings, this permits use of the entire
loading volume up to the roof behind
the seats of the 2nd row.
12 V accessory socket
) To connect a 12 V accessory (max
power: 120 W), remove the cap and
connect an appropriate adaptor.
) Turn the key to the ignition on posi-
tion.
To use the net in the 2nd row (additional
seats folded or removed):
) roll up or remove the load space
screen,
) open the covers of the upper fi xings 1 ,
) unroll the high load retaining net,
) position one of the ends of the net's
metal bar in the corresponding up-
per fi xing 1 , then do the same with
the other end,
) attach the snap hook of each of the
net's straps in the corresponding
ring 2 , located on the lower fi xing of
the rear side seat belt,
) tighten the straps,
) check that the net is hooked and
tightened correctly.
When positioning the net, check
that the strap loops are visible from
the boot; this will make slackening
or tightening easier.
Hooks
The hooks can be used to hold shop-
ping bags.
Loading ...
Loading ...
Loading ...