Loading ...
Loading ...
Loading ...
12 English
Oven use
Oven use
Checking that your oven is operating correctly
The following simple procedure enables you to check that your oven is
working correctly at all times. If you are in doubt, refer to the section entitled
“Troubleshooting” on the page 44-47.
NOTE
The oven must be plugged into an appropriate wall socket. The turntable must be
in position in the oven. If a power level other than the maximum (100 % - 900 W)
is used, the water takes longer to boil.
Open the oven door by pulling the handle on the upper side of the door.
Place a glass of water on the turntable. Close the door
Press the START/+30s button and set the
time to 4 or 5 minutes, by pressing the
START/+30s button the appropriate number
of times.
Result: The oven heats the water for 4 or
5 minutes. The water should then
be boiling.
Setting the time
When power is supplied, “88:88” and then “12:00” is automatically displayed on
the display.
Please set the current time. The time can be displayed in either the 24-hour or
12-hour notation. You must set the clock:
• When you rst install your microwave oven
• After a power failure
NOTE
Do not forget to reset the clock when you switch to and from summer and winter
time.
2
4
1
3
1. Press the Multi Function Selector Dial.
2. Turn the Multi Function Selector Dial to
set time display type. (12H or 24H)
3. Press the Multi Function Selector Dial
to complete the setup.
4. Turn the Multi Function Selector Dial to
set the hour.
6
5
7
5. Press the Multi Function Selector Dial.
6. Turn the Multi Function Selector Dial to
set the minute.
7. When the right time is displayed, press
the Multi Function Selector Dial to start
the clock.
Result: The time is displayed whenever
you are not using the microwave
oven.
MC32J7055HT_SP_DE68-04319M-02_EN.indd 12 2/16/2016 2:46:46 PM
Loading ...
Loading ...
Loading ...