Loading ...
Loading ...
Loading ...
Securing a child restraint seat with
Tether Anchor system
Child restraint hook holders are located
on the package tray.
1. Route the child restraint seat strap
over the seatback.
For vehicles with adjustable head‐
rest, route the tether strap under
the headrest and between the
headrest posts, otherwise route
the tether strap over the top of the
seatback. In case of interference
between the child restraint seat
and the headrest remove the par‐
ticular head restraint for better fit‐
ment of the child restraint seat.
2. Connect the tether strap hook to
the appropriate child restraint hook
holder and tighten to secure the
child restraint seat.
WARNING
A child can be seriously injured or kil‐
led in a collision if the child restraint
is not properly anchored to the car
and the child is not properly re‐
strained in the child restraint. Al‐
ways follow the child seat manufac‐
turer’s instructions for installation
and use.
WARNING
n
Tether strap
Never mount more than one child re‐
straint to a single tether or to a sin‐
gle lower anchorage point. The in‐
creased load caused by multiple
seats may cause the tethers or an‐
chorage points to break, causing se‐
rious injury or death.
WARNING
n
Child restraint check
Check that the child restraint sys‐
tem is secure by pushing and pulling
it in different directions. Incorrectly
fitted child restraints may swing,
twist, tip or separate causing death
or serious injury.
WARNING
n
Child restraint anchorage
(Continued)
3-39
3
Safety features of your vehicle
Loading ...
Loading ...
Loading ...