Loading ...
Loading ...
Loading ...
The second stage alarm will activate
when:
1. The first stage alert is on
2. The turn signal is on to change a
lane
When the second stage alert is activa‐
ted, a warning light will blink on the
outside rearview mirror, the head up
display and an alarm will sound.
If you move the turn signal switch to
the original position, the second stage
alert will be deactivated.
-
The second stage alarm may be de‐
activated.
• To activate the alarm:
Go to the User Settings Mode →
Sound and select "BSD" on the LCD
display.
• To deactivate the alarm:
Go to the User Settings Mode →
Sound and deselect "BSD" on the LCD
display.
CAUTION
The alarm function helps alert the
driver. Deactivate this function only
when it is necessary
Detecting sensor
The sensors are located inside of the
rear bumper.
Always keep the rear bumper clean for
the system to work properly.
Warning message
The message will appear to notify the
driver if there are foreign substances
on the rear bumper or it is hot near the
rear bumper. The light on the switch
and the system will turn off automati‐
cally.
Remove the foreign matter on the rear
bumper.
After the foreign substance is removed,
if you drive for approximately
10 minutes, the system will work nor‐
mally.
Driving your vehicle
5-82
Loading ...
Loading ...
Loading ...