Loading ...
Loading ...
Loading ...
To apply the EPB (electric parking
brake):
1. Depress the brake pedal.
2. Pull up the EPB switch.
Make sure the warning light comes on.
Also, the EPB is applied automatically if
the Auto Hold button is on when the
engine is turned off.
However, if you press the EPB switch
within one second after the engine is
turned off, the EPB will not be applied.
CAUTION
Do not operate the parking brake
while
the vehicle is moving except in
an emergency situation. It could
damage the vehicle system and en‐
danger driving safety.
Releasing the parking brake
To release the EPB (electric parking
brake), press the EPB switch in the fol‐
lowing condition:
• Have the Engine Start/Stop button in
the ON position.
• Depress the brake pedal
Make sure the brake warning light goes
off.
To release EPB (electric parking brake)
automatically:
• Shift lever in P (Park)
With the engine running depress the
brake pedal and shift out of P (Park)
to R (Rear), N (Neutral) or D (Drive).
• Shift lever in N (Neutral)
With the engine running depress the
brake pedal and shift out of N (Neu‐
tral) to R (Rear) or D (Drive).
• Depress the accelerator pedal satis‐
fying the following conditions.
1. Engine running
2. Driver's seat belt fastened
3. Driver's door, engine hood and
trunk closed
4. Shift lever in R (Rear), D (Drive) or
M (Mode)
Driving your vehicle
5-28
Loading ...
Loading ...
Loading ...