Loading ...
Loading ...
Loading ...
Installation
1. Recline the seatback (2) with the
recliner control switch (1).
For manual type
2. Put the headrest poles (3) into the
holes while pressing the release
button (4).
3. Recline the seatback (6) with the
recliner control switch (5).
4. Adjust the headrest to the appro‐
priate height.
For power type
2. Raise it as far as it can go by pulling
the switch up (3).
3. Put the headrest poles (4) into the
holes and then pull the switch down
(5) until the headrest moves to the
lowest position.
4. T
o install the headrest securely,
move the headrest up and down 2
or 3 times by pulling the switch up
and down.
5. Recline the seatback (7) with the
recliner control switch (6).
6. Adjust the headrest to the appro‐
priate height.
WARNING
If you don't install the headrest se‐
curely, the active headrest may not
operate normally. When reinstalling
the headrest, install it securely as
procedures.
WARNING
Make sure the headrest locks in po‐
sition after adjusting it to properly
protect the occupants.
Safety features of your vehicle
3-12
Loading ...
Loading ...
Loading ...